scrap motor stator cutting and pulling recycling machine
ST-400 is our newly design, used for recycling scrap motors, get out the copper winding from motor stator. Machine motor stator process range is 90-250mm.
Machine two working section, cutting section and pulling section.
Cutting section have 2 kind blades, flat blade and sharp blade. Flat blade used for cutting motor case, sharp blade used for cutting motor stator into 2 pieces.
Raw Materials:
If you have below raw materials--scrap motors, please contact me freely.
Xi'an Grand Harvest Equipment Co., Ltd.
P/F.: 0086-029-89380280
Whatapp: 008613022919036
Email:bsgh009@bsghequipment.com
