Used Cable Granulator Installation Method
1.How to make Electrostatic Separation Connect To Ground?
The two wires in the electrostatic separation,one is used to protect the motor and the other is used to protect the machine. They are respectively connected to the holes of the angle iron, and the depth of each hole is at least 1 meter deep.
2.How to adjust the dust fan?
Dust collection equipment can adjust the air volume of the wind suction fan blower 45-50.
Pictures and videos after installation of electrostatic separation equipment for your reference：
3.How to Install Water Pump Part?
The video of the water pump connected to the crusher for your reference
4.How to Install the Metal pipe?
5.How to clean the dust on the air separator sieve?
High-pressure air gun to clean the dust on the air separator sieve.The video is as follows：
6.The functional effect of the waste copper granulator separator blade
The gap between the fixed blade and the movable blade of the waste copper granulator separator machine should be as small as possible, and the gap between the fixed blade and the movable blade of our BSGH waste copper granulator separator machine is very small.
As shown in the following video, the fixed and moving blades of our waste copper granulator separator have high accuracy, the gap is small, and the plastic paper can be easily cut off：
BS-1200P radiator stripping machine video taken by our customer
