PVC Mixed Plastic Separator Machine Recycling Equipment BS-MS500:
1:The machine's capacity is 400-500 KG/H,the size is L12000*W2100*H2100mm.The weight of this machine is 2000KG, the power is 19.25KW.
2:The equipment is a complete set of assembly line layout, which is controlled by the PLC automation programming and man-machine interface operating screen: reasonable coordination of intermediate transport and upgrading links and the sorting host for the purpose of automatic transmission and automatic discharge, which saves labor and can be easily operated.
3:High sorting purity, and the highest sorting purity can reach up to more than 99%.
4:Physical sorting, energy conservation and environmental protection without any discharge of the three wastes.
PVC Mixed Plastic Separator Machine Recycling Equipment
a.Mixed plastic separation machine is for processing the plastic mixture to separated plastics for recycling use. This set of Mixed Plastic recycling production line is suitable for all kinds of hybrid plastics that are difficult to sort by density flotation, sorting ABS / PC / submerged PP, PET / PVC, PC / PMM, ABS / modified benzene, PET / EVA, PET / PS / PP , Alloy / modified benzene and other hybrid plastics.
b.The accuracy (purity) of the crushed particles can be more than 99%. For the mixture of special components, the chargeability should be tested first and the polarity of the plastic in different spaces due to friction, or add the corresponding active agent to increase.
c.The surface is electrified, so that different materials can be sorted out better, and there is no pollution of three wastes, which belongs to environmental protection recycling.
Mixed Plastic Separator Recycling Equipment data
| Model no. | power | Machine size（mm） | Voltage | capacity | weight | recycling rate |
| BS-MS500(3000) | 19.25kw | L12000×W2100×H2100 | Customized | 400~500kg/h | 2.0T | 99% |
Working Process of Mixed Plastic Separation Machine
As the input size will make the big difference for the charge, the uniformity and weight of the feed stock also will affect the separation process. If the feed stock is in a very bad state with big differences, better to be screened into different sizes to get the high separation rate.
So the collected mixed plastic needs to be shredding first, and the waste mixed plastic after the shredding can be cut into particles of 1-2 cm size. Because the plastic itself contains a small amount of moisture, the plastic is dried after it is shredding.
Mixed Plastic Separator Machine Composition Configuration
① High-voltage supply: the alternating current is converted into direct current through full-wave rectification, supplying high-frequency oscillator conversion or high-frequency electric energy of several thousand weeks to tens of thousands of cycles, and then boosted by a high-frequency transformer, and then supplying multiple voltage rectifiers Obtain a DC high voltage sorting space of about 100,000 volts.
② Sorting host: this part uses frequency conversion speed regulation, while saving energy in order to facilitate more accurate adjustment of the drum speed and cloth speed required by different materials.
③ Feeding equipment: In order to avoid the charge transfer of materials caused by the humid air in the air and affect the efficiency and effect of sorting, the feeding system adopts hot air transportation to minimize the external influence factors.
④ Plastic dryer: This equipment adopts intelligent adjustable control of hot air temperature, so that the materials can be dried quickly and evenly. Only in the case of drying can we congratulate the plastic in the next step to create good conditions.
PVC Mixed Plastic Separator Machine Recycling Equipment Display
BSGH EQUIPMENT Aftersale Service
1: Overseas technical support available.
2: All day long 24hours service,call me : 008613772508206.
Hot Tags: PVC Mixed Plastic Separator Machine Recycling Equipment, manufacturers, suppliers, factory, wholesale, buy, customized, cheap, distributor, dealer, low price, for sale, best quality
